Corner Check; Dimensional/3-Dimensional View Toggle; Zoom; Remaining Embroidery Time By Color - Husqvarna Designer Diamond User Manual

Table of Contents

Advertisement

Corner check

Corner Check can be used to trace the four corners of the
design so that you can see where the design will be on the
fabric. Touch the corner check icon. Each time you touch the
icon it will move the hoop in the following order: upper left,
upper right, lower right, lower left and then go back to the
current stitch position.
2-dimensional/3-dimensional view
toggle
In 2-dimensional view, the designs load faster on the
screen and it is easier to see the color blocks in the design.
3-dimensional view gives a more realistic view of the designs,
with added shadows and depth.
Touch the "3D" icon to change to 3-dimensional view. The
icon becomes selected. Touch again to deselect and return to
2-dimensional view.

Zoom

Zoom In/ Out
Use to zoom in or out of the embroidery eld. Use Zoom In
(+) to get a close-up view of an area within the embroidery
design. Use (-) to Zoom Out to view the entire design.
Zoom to Hoop/ Zoom to All
Zoom to Hoop will adjust the embroidery eld to t the
selected hoop. To see your design as large as possible, use
the Zoom to All function. The embroidery will ll the entire
embroidery eld. To close, touch the screen once.
Zoom to Box
Touch and drag your stylus in the embroidery eld on the
screen to create a box. The screen zooms to show that speci c
area.

Remaining Embroidery Time by Color

An estimation of the remaining embroidery time for the
current color block is displayed in hours and minutes in the
lower left corner of the screen.

Thread Tension Control

When embroidering with specialty thread or fabric you may
need to adjust the thread tension to achieve the best result.
Thread tension can be adjusted up or down using the + and
the - on the thread tension control.

Step Stitch-by-Stitch control

Touch + to step forward and - to step backwards stitch by
stitch. Use the - icon to move backwards a few steps after
the needle thread breaks or runs out. Touch & Hold to move
through the stitches more quickly. The cursor on the screen
will follow the stitches in the embroidery eld.
8:8
Embroidery Stitch-Out
Smart Save
Corner Check
2-dimensional/
3-dimensional
view toggle
Zoom In
Zoom to Hoop
Step Stitch-by-Stitch Control
Thread Tension Control
Zoom to Box
Zoom to All
Zoom Out
Remaining Embroidery Time by
Color

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viking designer diamond

Table of Contents