Sewing Techniques 4:10; Seam - Husqvarna Designer Diamond User Manual

Sewing Techniques

Seam

A seam sews two pieces of fabric together with a seam
allowance that will usually be pressed open. In most cases,
edges of the seam allowance are nished with an overcast
stitch before sewing the seam.
Seams in stretch fabric must stretch with the fabric. The
stretch stitch makes a stretchy seam that is suitable for
sewing together pieces of light stretch fabric.
: Woven medium, cut in two.
FABRIC
: Woven medium fabric and Seam technique.
SELECT
(The Exclusive SEWING ADVISOR™ feature selects a
straight stitch.)
: Presser foot A and size 80 needle as recommended.
USE
:
SEW
• Place fabrics right sides together. Put the fabric in
position under the presser foot. Line up the edge with
the 5/8'' (15 mm) seam guide.
• Step on the foot control. The presser foot lowers
automatically.
• Sew a seam. When nished, touch the Selective
Thread Cutter. The Selective Thread Cutter cuts top
and bobbin threads and the presser foot raises so you
can remove your project.
: Stretch light, cut in two.
FABRIC
: Stretch light fabric and Seam technique. (The
SELECT
Exclusive SEWING ADVISOR™ feature selects a stretch
stitch.)
: Presser foot A and size 75 stretch needle as
USE
recommended.
:
SEW
• Place fabric pieces right sides together. Put the fabric
in position under the presser foot. Line up the edge
with the 3/8'' (10 mm) seam guide for a 5/8"seam.
• Step on the foot control. The presser foot lowers
automatically.
• Sew a seam. When nished, touch the Selective
Thread Cutter. The Selective Thread Cutter cuts top
and bobbin threads and the presser foot raises so you
can remove your project.
4:10 4:10
Sewing
7
Straight stitch.
Straight stitch can also be used for topstitching.
For a more visible topstitch, lengthen the stitch
and use heavier thread with a larger size needle.
7
Stretch stitch.