Save To "My Stitches"; Save Your Program In "My Files" - Husqvarna Designer Diamond User Manual

Save to "My Stitches"

Touch the Save to My Stitches icon to open the dialogue
for saving a stitch program or an adjusted stitch in "My
Stitches", the U menu. There are four U menus, which you
can step between using the arrows.
Save on Free Position
Previously saved stitches or stitch programs are shown in
the U-menu. The new stitch or program can be saved at
any free position. Simply touch a free position, and your
stitch or stitch program is stored there.
Save on Occupied Position
Touch an occupied position and a pop-up message will ask
you to con rm the overwriting of the old stitch. Touch
OK to replace the old stitch with the new one. Touch
Cancel to close the pop-up message, and choose another
saving position.
Cancel Save Process
To cancel the save process, close the window with OK
instead of touching any storing position. The saving
window will close, and you return to the previous screen.
Delete Saved Stitch or Program
To delete a saved stitch or program, touch the Delete icon .
The Delete icon is active until a program is selected and
deleted or until it is touched again. If a stitch is selected
to be deleted a pop-up message will ask you to con m the
deletion.
Note: If you Touch & Hold on the Delete icon, you can delete all
your stitches in My Stitches.
Save your Program in " My Files"
You can also save your program as a stitch le in the "My
Files" folder or on a USB device.
In Program mode, touch the Save to My Files icon to
open the Save Stitch window. The machine will give you a
default name. If you want to change the name touch the
Rename icon.
Select which folder to save in with the Touch & Hold
function. Touch OK and your le is saved in that location
(see File Manager, chapter 9).
Program
5:5 5:5