Table of Contents
Advertisement
Start/Stop
Speed + and -
Sensor Foot Up and
Extra Lift
STOP
Sensor Foot Down and
Pivot
FIX
STOP
Sewing Mode
Select STOP to conclude a stitch. Your machine xes the
thread and stops automatically when one stitch or stitch
program has been completed. When STOP is selected only
one stitch is displayed on the Ultimate Interactive Screen.
The STOP button lights up when you touch it. Select
STOP again to cancel or by selecting a new stitch. The
STOP button light will go out. The STOP function can be
programmed, see program chapter. The STOP function is
cancelled when the stitch is completed.
Embroidery Stitch-Out
Select STOP to eliminate stops for color changes or to
create monochrome embroidery, see Embroidery Stitch-
Out chapter.
FIX
Sewing Mode
FIX is used to tie off a stitch. FIX is automatically
activated when you select a stitch, use the Selective Thread
Cutter, select Stitch Re-Start, STOP or by touching FIX
while you are sewing. At the beginning, your machine sews
a few tie-off stitches and continues with the selected stitch.
Touch FIX while sewing and your machine sews a few
tie-off stitches and stops automatically. The FIX button
lights up when the FIX function is active. Touch the lit
button to turn the function off. The FIX function can be
programmed, see Program chapter.
Note: FIX Auto can be cancelled in the SET Menu, Machine
Settings (see page 3-8). No tie-off stitches will be sewn unless you
select the FIX button on your machine.
Embroidery Stitch-Out
Touch FIX to baste an outline of the embroidery design
area to baste the fabric to the stabilizer.
3:14
Ultimate Interactive Screen
Selective Thread cutter
EXCLUSIVE SENSOR
SYSTEM™
Thanks to the EXCLUSIVE SENSOR SYSTEM™ feature,
the presser foot continuously senses the thickness of fabric,
embroidery or stitching and sews over it smoothly and
evenly with perfect fabric feed.
Go to the SET Menu, Sewing Settings, to see the actual
setting of the Sensor pres ser foot pressure for the selected
fabric and adjust the presser foot pressure.
Sensor Foot Up and Extra Lift
Touch Sensor Foot Up to raise the pres ser foot. Touch it
a second time and the pres ser foot will raise to Ex tra Lift,
and the feed teeth are lowered automatically to make it easy
to get thick fabric under the pres ser foot.
Sensor Foot Down and Pivot
The presser foot is lowered automatically when you start
sewing.
Sewing Mode
Touch the Sensor Foot Down and Pivot button and the
pres ser foot will be completely lowered. The machine
rmly holds the fabric. Touch Sensor Foot Down again to
get the Pivot position.
Embroidery Mode
In Embroidery Mode touch Sensor Foot Down to lower
the presser foot into the Embroidery " oat" position.
Stitch Re-Start
Needle Up/Down
Advertisement
Table of Contents
