Table of Contents
Advertisement
Carrying out the pyrolysis function
1
Warning: The oven becomes extremely hot during this procedure. Be sure
to keep young children well away.
1
Important! All removable parts including the side rails must be removed
from the oven before using the pyroluxe function.
3
If you are using any other removable oven accessories, these must be re-
moved before the pyrolytic cleaning process.
Carrying out the pyrolysis function
1.Remove larger patches of soiling by hand first.
2.Select the "Pyrolysis" oven function.
– "PYROLYSE NORMAL" will be displayed in the oven function display,
– "2:45" will appear in the cook time display
– The switch off time will be displayed in the end time display.
– The "Length" arrow will flash for approx. 5 seconds.
Following this, the pyrolysis cleaning function begins.
3
– The oven lighting is not in operation.
– The door becomes locked when a certain pre-programmed temperature is
reached.
– The key symbol is active until the door becomes unlocked again.
Changing the length of the pyrolysis function
1.Proceed as described in "Carrying out the pyrolytic function".
2.While "Length" is flashing with
ysis function:
– "PYROLYSIS ECO/2:15" or
– "PYROLYSE INTENSE/3:15"
The "Length" arrow will flash for approx. 5 seconds.
Following this, the pyrolytic cleaning function begins.
3
If "Length" is no longer flashing, press the "Clock functions" selector button
again and then reset the function again.
Changing the pyrolysis switch-off time
The pyrolysis switch-off time can be extended using the "End" clock func-
tion.
When each pyrolysis setting is to be used:
– PYROLYSIS LIGHT for cleaning a lightly soiled oven
– PYROLYSIS NORMAL for cleaning a moderately soiled oven
– PYROLYSIS INTENSIVE for cleaning a heavily soiled oven
/
select the desired length of the pyrol-
61
Advertisement
Table of Contents
