Table of Contents
Advertisement
28
Base settings
If you have subscribed to your network's Caller
Display service, your BT Synergy 5100 does not
ring until the caller information has been received
and displayed.
However, if you want your handset to ring
without waiting for the caller information to
be displayed, set First Ring to On. Please note
that this will mean the first ring you hear will
be the default ringtone. This will change to any
ringtone you have set once the caller information
is displayed.
The System PIN is used when changing certain
settings and registration / de-registration. The
default setting is 0000. You can change this to
your own preferred number up to 8 digits.
When you enter a PIN the digits are shown as
****.
You can restore your BT Synergy 5100 to its
default (original) settings.
It will not affect the phonebook, calls list or
user's data.
All handsets registered to the base wil
be retained.
All text, handset and base settings will be reset.
If you experience any problems, please call the Helpline on 0800 145 6789* or email bt.helpdesk@sgweurope.com
First ring
1. Press menU, scroll
2. Scroll
to set Base and press select.
3. Scroll
to first ring and press select.
4. Press
or
to on or off then press select to confirm.
5. Press Back to return to the previous menu level.
System PIN
1. Press menU, scroll
2. Scroll
to set Base and press select.
3. Scroll
to sYstem Pin and press select.
4. Enter the old PIN (original setting 0000) and press ok.
5. Enter the new PIN and press ok.
6. Re-enter the new PIN and press ok.
7. Press Back to return to the previous menu level.
Restore default settings
1. Press menU, scroll
2. Scroll
to set Base and press select.
3. Scroll
to master reset and press select.
4. Select Yes to confirm or no to cancel.
5. Enter the system PIN (original setting 0000) then press ok. The display will
show reset comPlete then return to standby.
to settings and press select.
to settings and press select.
to settings and press select.
Advertisement
Table of Contents
