Unpacking Instructions; Tools Needed For Assembly - Emerson CF760AB00 Owner's Manual

60” designer ceiling fan

Hide thumbs

Table Of Contents

Table of Contents

BP7287 60" DESIGNER FAN

This Manual Is Designed to Make it as Easy as Possible for You to

Assemble, Install, Operate and Maintain Your Ceiling Fan

Tools Needed for Assembly

One Phillips head screwdriver

One stepladder

One 1/4" blade screwdriver

One wire stripper

Three wire connectors (supplied).

MATERIALS

Wiring outlet box and box connectors must

be of type required by the local code. The

minimum wire would be a 3-conductor (2-

wire with ground) of the following size:

For your convenience, check-off boxes are provided next to each step. As each

step is completed, place a check mark in the box. This will insure that all steps

have been completed and will be helpful in finding your place should you be

interrupted.

WARNING

Do not install or use fan if any part is

damaged or missing. Call Toll-Free:

1-800-654-3545

WARNING

This product is designed to use only

those parts supplied with this product

and/or

any

accessories

specifically for use with this product by

Emerson Electric Co. Substitution of

parts or accessories not designated for

use with this product by Emerson

Electric Co. could result in personal

injury or property damage.

1. Check to see that you have received

the following parts:

NOTE: If you are uncertain of part

description, refer to exploded view

illustration.

a. Fan motor assembly

b. One switch housing assembly

c. Five fan blades

d. One ceiling cover

e. Five blade flanges

f. One hanger ball/downrod assembly

g. One hanger bracket

h. One coupling cover

3/10/05

10:42 AM

Page 2

Installed Wire Length Wire Size A.W.G.

Up to 50 ft.

50-100 ft.

Before assembly your ceiling fan, refer to

section on proper method of wiring your

fan (page 7). If you feel you do not have

enough wiring knowledge or experience,

have your fan installed by a licensed

electrician.