Table of Contents
Advertisement
BP7287 60" DESIGNER FAN
How to Hang Your Ceiling Fan
WARNING
!
The fan must be hung with at least 7' of
clearance from floor to blades (Figure 9).
CEILING
AT LEAST
7'
FLOOR
Figure 9
WARNING
!
The outlet box and joist must be securely
mounted and capable of supporting at
least 50 lbs. Use only a U.L. outlet box
listed as "Acceptable for Fan Support".
WARNING
!
To reduce the risk of fire, electrical
shock, or personal injury, mount fan to
outlet box marked "Acceptable for Fan
Support", and use screws supplied with
outlet box. Most outlet boxes commonly
used for support of light fixtures are not
acceptable for fan support and may need
to be replaced. Consult a qualified
electrician if in doubt.
1. Securely attach the hanger bracket to
the outlet box using the two screws
supplied with the outlet box. (Figure 10.)
3/10/05
10:42 AM
Page 6
TWO SCREWS
SUPPLIED WITH
OUTLET BOX
Figure 10
2. Carefully lift the fan and seat the
hanger ball/downrod assembly on the
hanger bracket that was just attached
to the outlet box (Figure 11). Be sure
the groove in the ball is lined up with
tab on the hanger bracket (Figure 10).
Failure to seat tab in groove could cause
damage to electrical wires and possible
shock or fire hazard.
To avoid possible fire or shock, do not
pinch
ball/downrod assembly and hanger
bracket.
NOTE: CEILING COVER, SUPPLY WIRES AND FAN
WIRES OMITTED FOR CLARITY.
Figure 11
6
OUTLET
BOX
HANGER
BRACKET
TAB
WARNING
!
WARNING
!
wires
between
the
hanger
OUTLET
BOX
HANGER
BRACKET
HANGER BALL/
DOWNROD ASSEMBLY
Advertisement
Table of Contents
