Adjusting The Shock Absorber Assemblies - Yamaha Drag Star XVS250 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Adjusting the shock absorber
assemblies
Each shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
CAUTION:
3
_
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
_
WARNING
_
Always adjust both shock absorber
assemblies equally, otherwise poor
handling and loss of stability may
result.
_
EAU00300
EC000015
1. Spring preload adjusting ring
2. Position indicator
Adjust the spring preload as follows.
EW000040
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring on each shock ab-
sorber assembly in direction a. To de-
crease the spring preload and thereby
soften the suspension, turn the adjust-
ing ring on each shock absorber as-
sembly in direction b.
NOTE:
_
Align the appropriate notch in the ad-
justing ring with the position indicator
on the shock absorber.
_
CI-10E
3-10
Setting
Minimum (soft) 1
Standard 2
Maximum (hard) 5