Spoke Wheels; Adjusting The Clutch Lever Free Play - Yamaha Drag Star XVS250 Owner's Manual

Spoke wheels

To maximize the performance, durabil-
ity, and safe operation of your motor-
cycle, note the following
regarding the specified wheels.
The wheel rims should be checked
for cracks, bends or warpage, and
the spokes for looseness or dam-
age before each ride. If any dam-
age is found, have a Yamaha
dealer replace the wheel. Do not
attempt even the smallest repair to
the wheel. A deformed or cracked
wheel must be replaced.
The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.
Ride at moderate speeds after
changing a tire since the tire sur-
face must first be "broken in" for it to
develop its optimal characteristics.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU00685
points
1. Locknut
2. Clutch lever free play adjusting bolt
c. Clutch lever free play
Adjusting the clutch lever free
play
The clutch lever free play should mea-
sure 5–10 mm as shown. Periodically
check the clutch lever free play and, if
necessary, adjust it as follows.
1. Loosen the locknut at the clutch
lever.
2. To increase the clutch lever free
play, turn the adjusting bolt in di-
rection a. To decrease the clutch
lever free play, turn the adjusting
bolt in direction b.
1. Locknut
2. Clutch lever free play adjusting nut
3. If the specified clutch lever free
EAU00694
4. Fully turn the adjusting bolt at the
5. Loosen
6. To increase the clutch lever free
7. Tighten the locknut at the clutch
6-19
play could be obtained as de-
scribed above, tighten the locknut
and skip the rest of the procedure,
otherwise proceed as follows.
clutch lever in direction a to loos-
en the clutch cable.
the locknut
crankcase.
play, turn the adjusting nut in di-
rection a. To decrease the clutch
lever free play, turn the adjusting
nut in direction b.
lever and the crankcase.
6
at the