Handlebar Switches - Yamaha Drag Star XVS250 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Pass switch " "
2. Dimmer switch
3. Turn signal switch
4. Horn switch " "

Handlebar switches

Pass switch " "
Press this switch to flash the headlight.
Dimmer switch
Set this switch to "
beam and to " " for the low beam.
Turn signal switch
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
EAU00118
EAU00119
EAU00121
" for the high
EAU00127
". To signal a left-hand
". When
EAU00129
"
3-4
1. Engine stop switch
2. Light switch
3. Start switch " "
Engine stop switch
Set this switch to " " to stop the en-
gine in case of an emergency, such as
when the motorcycle overturns or
when the throttle cable is stuck.
Light switch
Set this switch to " " to turn on the
auxiliary light, meter lighting and tail-
light. Set the switch to "
the headlight also.
EAU00138
EAU00134
" to turn on