Yamaha Drag Star XVS250 Owner's Manual page 43

1. Engine oil drain bolt
2. Oil pan
3. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
NOTE:
_
Skip steps 4–6 if the oil filter element is
not being replaced.
_
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Bolt ( 3)
4. Remove the oil filter element cover
by removing the bolts.
6-11
1. Oil filter element
2. O-ring
5. Remove and replace the oil filter
element and O-ring.
6. Install the oil filter element cover
by installing the bolts, then tighten-
ing them to the specified torque.
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m·kg)
NOTE:
_
Make sure that the O-ring is properly
seated.
_
6