Table of Contents
Advertisement
3. The triangle next to the current temperature flashes. You can set the new temperature
you want only by turning the knob.
4. Confirm the new temperature by pressing OK.
The set oven function continues at the new temperature.
Changing the oven function during the cooking process.
1. To change the oven function later on, turn the knob to the left.
2. The frame within the display only marks the left-hand section in which the current
oven function is shown. Confirm by pressing OK.
3. Set the new oven function by turning the knob.
4. Confirm the new oven function by pressing OK.
The new oven function starts at the corresponding suggested temperature. You can change
this temperature.
Meatprobe
When using the meat probe, the oven automatically switches itself off once it has reached
the core temperature.
Caution: Only the meat probe supplied may be used! If replacing, please use only original
spare parts
1. Switch the oven on.
2. Insert the meat probe into the meat. The
tip of the meat probe must be placed in
the middle of the piece of meat.
3. Insert the meat probe plug into the socket on the side wall of the oven as far as it will
go.
– A suggestion for the core tempera-
ture appears in the display.
4. Set the core temperature you want by turning the knob.
5. Then press the OK button to confirm the temperature.
6. Set the oven function and the oven temperature you want.
The core temperature is displayed from 30°C
Within a few minutes, a provisional end time is calculated, at which the core temperature
set will be reached. This time is constantly recalculated and updated in the display. For the
system to work it is essential that the meat probe is in the meat and in the socket at the
start of the cooking process and that it is not removed during the cooking process.
13
Operation
2
1
0
60 C
Meatprobe
1/2
Advertisement
Table of Contents
