Table of Contents
Advertisement
Meatprobe
For switching off the oven when the temperature at the centre of a roast reaches a set
temperature.
There are two temperatures to consider:
– The oven temperature: see Roasting Table
– The core temperature: see Meatprobe Table
Important!: Only the meat probe supplied may be used. If replacing, please use only
1
genuine spare parts.
1. Switch on the appliance using the On/Off
2. Push the tip of the meat probe right into the
meat so that the tip is in the centre of the
meat.
3. Insert the meat probe plug into the socket on
the side wall of the oven as far as it will go.
4. Using the
temperature.
The display changes to the current core tem-
perature.
If the current core temperature has already
been displayed, before the desired core temper-
ature is set, then press the Selection
repeatedly, until the function Meatprobe
flashes and then carry out the setting.
The core temperature is displayed from 30°C.
3
5. Select oven function and oven temperature.
or
button set the desired core
button.
button
Using the Oven
15
Advertisement
Table of Contents
