Using Tmc; Reading A Message - Becker TRAFFIC ASSIST Z101 Operating Instructions Manual

>>> NAVIGATIONAL MODE

Using TMC

> D Once you have connected the TMC an-
tenna, your Traffic Assist will receive cur-
> GB
rent traffic announcements and dynamic
route calculation will be enabled (traffic
> F
jam diversion). You can also view traffic
> I announcements directly.
To preset the TMC, See "The Routing
> E
options key" on page 43.
> NL
> In the map display, activate the toolbar
(see also page 55) and press
50
The message list appears.
You can scroll through the list using the
arrow keys
edge of the screen.
.
TMC
The road number (motorway, A-road or
district roads), section of road if applica-
ble, traffic direction and the type of prob-
lem are displayed in each traffic message.

Reading a message

> Press on the desired message in the list.
The message display appears.
on the right–hand
If the message text is longer than the
display space available, the
appears at the bottom right.
> Press this button in order to view the
remaining message text.
> Press the arrow buttons
scroll in the messages.
> Press the key
message list.
button
to
to return to the