Unit Bracket; Fitting The Unit Bracket - Becker TRAFFIC ASSIST Z101 Operating Instructions Manual

Unit bracket

The Traffic Assist can be attached directly
to the windscreen with the unit holder.
Note:
The Traffic Assist and unit bracket must
not be exposed to long periods of direct
sunlight. Temperatures inside the vehicle
of +70 C and higher may damage parts of
the bracket.
1
6
2 3 4
Suction surface
1
Lever
2
Base
3
Fastening screw
4
Carrier plate
5
Clip
6
GERNARAL OPERATION

Fitting the unit bracket

Note:
Fasten the unit holder such that your
field of vision is not impaired when the
Traffic Assist is installed and ensure that
the unit is outside the deployment area of
the airbag.
Ensure that the electrical connection ca-
ble does not hamper you from accessing
the vehicle's controls.
Clean the attachment surface on the
windscreen to ensure that it is clean and
free of grease. Do not use greasy or soapy
5
cleaning agents.
>>>
> D
> GB
> F
> I
> E
> NL
19