The Automatic On/Off Key; The Calibration Key; The Factory Settings Key - Becker TRAFFIC ASSIST Z101 Operating Instructions Manual

>>> NAVIGATIONAL MODE

The Automatic on/off key

The Traffic
> D
automatically to sleep mode when the
> GB
vehicle ignition is switched off.
Prerequisite:
> F
• The Traffic Assist must be connected to
> I the vehicle cigarette lighter (see also
page 16).
> E
• The cigarette lighter is de-energized
after the ignition is switched off.
> NL
• The relevant function can be switched
on at the Traffic Assist.
> Press
Automatic on/off
Depending on the previous setting, the
function will be switched on or off. The
current setting is indicated via display of
the relevant icon in colour.
• Left icon: The function is switched on,
the Traffic Assist does switch off auto-
matically.
• Right icon: The function is switched
off, the Traffic Assist does not switch off
automatically.
48

The Calibration key

Assist can switch If the touch-screen reacts incorrectly
to the touching of the screen in specific ar-
eas, calibration is required.
The calibration can be started using the
following button.
> Push the button
The calibration process is started.
You will be guided through the procedure
by means of text instructions.
.

The Factory settings key

You can reset your Traffic Assist to the
factory settings.
All the changed settings will be reset and
saved destinations will be deleted.
> Press the
.
Calibration
> Press the
The Traffic Assist is reset to the factory
settings.
button.
Factory settings
button.
Yes