The Language Key; The Information Key - Becker TRAFFIC ASSIST Z101 Operating Instructions Manual

The Language key

The texts on the screen can be displayed in
a variety of languages.
The following button allows selection of
various different languages.
> Push the button
Language
The language selection appears.
In the language selection, the available
languages are shown in a list which ex-
tends over several pages. Each list area is a
contact surface. The individual contact
surfaces are marked with the language des-
ignation and the associated national flag.
These buttons
turning in the direction shown by the ar-
row through the pages of the list.
Note:
• If you change the language the software
restarts.
• The language selection is closed by
.
pushing the key
menu then appears.
> Push the contact area of the desired lan-
guage.

The Information key

allow page
Information concerning the Traffic Assist
is displayed using the following buttons.
> Push the button
The information display appears.
, and the setting
Please note particularly the product desig-
nation and the details of the software ver-
sion. Always quote these details in the
event of queries with Harman/Becker serv-
ice department.
> Press the
formation display.
NAVIGATIONAL MODE
.
Information
button to close the in-
Close
>>>
> D
> GB
> F
> I
> E
> NL
47