Troubleshooting - Strong Digital Satellite Receiver User Manual

Troubleshooting

Should you encounter some problems with this STB, please check the table
Below
Fault Phenomenon probably reasons
Power on, but no Please carefully check the
display on screen power plug, to see if it is
plugged in to the power
outlet. Has power been
interrupted?
Power on this Is the aerial installed
STB, then that
correctly?
screen displays
LNB input is not connect
"No signal"
The transmission has
been interrupted.
The sky wave disturbs the
device
The program setup is
incorrect
STB plays a strange Due to the channel
sound containing more audio
tracks or audio languages
Tips: If you referred to this troubleshooting guide, but it did not resolve the
problem you encountered. Please contact the local dealer or technical
support, do not open the machine, because that is very dangerous to you or
to the machine.
Resolve
Ensure the power plug is inserted
into the power outlet correctly.
Reinstall the aerial and calibrate it
Connect the LNB
Attempt again until the signal
returns
Attempt again later
Set the proper
parameters of received
program in the system
settings menu
User can use the "Audio" button
on the RCU to select the correct
audio track or audio languages
21