Final Gear Oil - Suzuki VL800 Owner's Manual

3. Remove the filler cap and add
properly
through the filler hole.
 WARNING
Engine coolant is harmful or
fatal if swallowed or inhaled.
Do not drink antifreeze or cool-
ant solution. If swallowed, do
not induce vomiting. Immedi-
ately contact a poison control
center or a physician. Avoid
inhaling mist or hot vapors; if
inhaled, remove to fresh air. If
coolant gets in eyes, flush eyes
with water and seek medical
attention. Wash
after handling. Solution can be
poisonous to animals. Keep
out of the reach of children and
animals.
NOTE: Adding only water will
dilute the engine coolant and
reduce its effectiveness. Add a
50:50 mixture of engine coolant
and water.
mixed coolant
thoroughly

FINAL GEAR OIL

Change the gear oil as follows:
1. Place the motorcycle on the
side stand.
2. Remove the oil filler cap 1.
3. Drain the oil into a suitable
container by removing the
drain plug 2 from the bottom
of the final gear case.
4. Reinstall the drain plug and
tighten it securely after all the
oil has been drained out. Hold
the motorcycle vertically and
pour fresh oil through the filler
hole until the oil level reaches
the oil filler hole. Approxi-
mately 200 – 220 ml (6.8 – 7.4
US oz) of oil will be required.
5. Reinstall the oil filler cap.
7-24