Coordinate Entry - Becker READY 45 LMU Operating Manual

>>> NAVIGATION MODE

Coordinate entry

You can also enter your destination using
> D
geographic coordinates.
> GB
> In the main menu, press the button
New destination
> F
> I
> PL
> Press Enter geo-coordinates
1
> Using select the value you wish to
2
change.
> Using the two buttons indicated by
select the direction required for the
geographic longitude and latitude
(east/west or north/south).
58
> Then enter the desired values using
The entry field at the beginning may be
displayed greyed out. Delete any entries
in the field with the backspace button, in
.
order to use the entry field. You can enter
coordinates in three different ways.
The following formats can be used:
• Degrees Minutes Seconds.Decimal
• Degrees Minutes.Decimal minutes
.
• Decimal degrees e.g. 48.89277778
Notes:
2
• The coordinates entered must
3
• If you press button
> Press the
1
the buttons to .
seconds e.g. 42°52'46.801"
e.g. 48° 53.56667'
correspond to WGS84 (World
Geodetic System 1984).
your current
3
geographic position will be entered
into the fields.
button.
Where possible, an address matching
the coordinates will be displayed. You
can view the destination on the map,
store it, display the route to the
destination or start the route guidance
straight away.