braking performance, which may re-
sult in loss of control and an acci-
dent.
PERIODIC MAINTENANCE AND ADJUSTMENT
Brake light switches
1. Rear brake light switch
2. Rear brake light switch adjusting nut
The brake light, which is activated by
the brake pedal and brake lever, should
come on just before braking takes ef-
fect. If necessary, adjust the rear brake
light switch as follows, but the front
brake light switch should be adjusted
by a Yamaha dealer.
1. Remove panel A. (See page 6-8.)
2. Turn the rear brake light switch ad-
justing nut while holding the rear
brake light switch in place. To
make the brake light come on ear-
lier, turn the adjusting nut in direc-
6-19
EAU22294
tion (a). To make the brake light
come on later, turn the adjusting
nut in direction (b).
3. Install the panel.
6