Checking The Shift Pedal; Brake Light Switches - Yamaha AG200FEB 2011 Owner's Manual

(a)
1
(b)
1. Brake pedal free play adjusting nut
2. Brake rod
WARNING

After adjusting the drive chain
slack or removing and installing
the rear wheel, always check the
brake pedal free play.

If proper adjustment cannot be
obtained as described, have a
Yamaha dealer make this ad-
justment.

After adjusting the brake pedal
free play, check the operation of
the brake light.
PERIODIC MAINTENANCE AND ADJUSTMENT

Checking the shift pedal

The operation of the shift pedal should
be checked before each ride. If opera-
tion is not smooth, have a Yamaha
dealer check the vehicle.
2
EWA10680
EAU44820

Brake light switches

1. Rear brake light switch
2. Adjusting nut
The brake light, which is activated by
the brake pedal and brake lever, should
come on just before braking takes ef-
fect. If necessary, adjust the rear brake
light switch as follows, but the front
brake light switch should be adjusted
by a Yamaha dealer.
Turn the rear brake light switch adjust-
ing nut while holding the rear brake light
switch in place. To make the brake light
come on earlier, turn the adjusting nut
in direction (a). To make the brake light
come on later, turn the adjusting nut in
direction (b).
7-20
EAU22273
2
1
(b)
(a)
2
3
4
5
6
7
8
9