Operation And Important Riding Points; Starting The Engine - Yamaha XJR1300 Owner's Manual

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

OPERATION AND IMPORTANT RIDING POINTS

EAU15951
TIP
This model is equipped with:
● a lean angle sensor to stop the en-
gine in case of a turnover. In this
EWA10271
case, the multi-function display in-
dicates error code 30, but this is
not a malfunction. Turn the key to
"OFF" and then to "ON" to clear the
error code. Failing to do so will pre-
vent the engine from starting even
though the engine will crank when
pushing the start switch.
●
an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. If the engine
stops, simply push the start switch
to restart the engine.
EAU48710

Starting the engine

In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:
●
●
1. Turn the key to "ON" and make
NOTICE
If a warning or indicator light does
not come on initially when the key is
turned to "ON", or if a warning or in-
5-1
The transmission is in the neutral
position.
The transmission is in gear with
the clutch lever pulled and the
sidestand up.
See page 3-23 for more informa-
tion.
sure that the engine stop switch is
set to " ".
The following warning lights and
indicator light should come on for a
few seconds, then go off.
●
Oil level warning light
●
Engine trouble warning light
●
Immobilizer system indicator
light
EAU33729
5
ECA11833