Tail/Brake Light; Replacing A Turn Signal Light Bulb - Yamaha XJR1300 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
5. Install the bulb cover, and then
connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
6

Tail/brake light

This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
6-32
EAU24181
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
EAU24204