Electrolux EOB 66713 User Information page 29

Then take hold of the second inner
Fig. 25:
pane "E" securely with both hands and push
it out upwards.
Once the inner panes have been removed,
clean the door and the panes.
Clean the glass panes with warm water only.
Do not use rough cloths, scouring pads,
steel wool, acids or abrasive products, so
that the surfaces of the glass panes and the
door are not damaged.
After cleaning, re-insert the inner panes.
The inner pane "E" (without side
decors) must be positioned so that
the small printed circle on the upper
lefthand side is visible when the door
is closed.
The inner pane "D" (with side decors)
must be arranged with the decorated
surface to the inner side of the door.
The slight roughness of the printing
must not be discernible when you
stroke your fingers over the visible
surface.
After reinserting the inner panes, adjust the
retainer "C", then:
Fig. 26: insert the right end of the perforated
aluminium plate "A" into the recess in the
retainer "C".
Fig. 27: Then insert the left end of the perforated
aluminium plate "A" into the recess in the retainer
"B". Insert the retainer "B" at this point and check
that everything is securely fastened and firm.
Appliances in stainless steel or aluminium
E
A
B
Fig. 25
C
Fig. 26
A
Fig. 27
29