Electrolux EOB 66713 User Information page 17

How to programme the Oven to
switch on and off
1. Set the Cooking Duration as described in
the relevant section.
2. Touch the time function control
function for the end of the cooking time is
selected and the corresponding symbol
is flashing. The control panel will display the
end of cooking time (that is, the actual time
+ cooking duration time) (Fig. 12).
3. Touch the " " control to select the desired
end of the cooking time.
Remember that the cooking
duration time as such will not
change.
4. After the setting is carried out, the
programmer will wait a few seconds and
then start running.
5. The oven will switch on and off automatically.
When it switches itself off, an acoustic alarm
will sound.
6. To switch off the acoustic alarm, touch the
control.
If you touch any other control, the alarm
will stop and the control panel will display
the symbols indicated in Fig. 10. Then, you
need to reset the programmer display by
pressing the
The acoustic alarm will switch off
automatically after approximately
two minutes. Touch the
to reset the programme.
If you want to cancel the programme,
simply cancel the Cooking Duration that
has been set (see the relevant section).
until the
control.
control
Fig. 12
17