Electrolux EOB 66713 User Information page 16

How to programme the Oven to
switch off
1. Switch the oven on, place food in the
oven, select the desired cooking function
and adjust the cooking temperature, if
necessary.
2. Touch the time function control
select the Cooking Duration function. The
Cooking Duration symbol
and "0.00" will appear in the display (Fig.
9).
3. While the symbol is flashing, set the
desired time using the " " control.
Maximum time is 23 hours 59 minutes.
The programmer will wait a few seconds
and then start running.
4. When the programmed time has elapsed,
the oven will
automatically. An acoustic alarm will be
heard and "0.00" will appear on the
control panel.
5. To switch off the acoustic alarm, touch
the control.
If you touch any other control, the alarm
will stop and the control panel will display
the symbols indicated in Fig. 10. Then,
you need to reset the programmer display
by pressing the
The acoustic alarm will switch off
automatically after approximately two
minutes. Then touch the
to reset the programme.
How to cancel a programmed Cooking
Duration Time:
— Touch the time function control
symbol flashes.
— Touch the control "
until the display shows "0.00" (Fig. 11).
16
and
will flash
be switched off
control.
control
until the
" to decrease the time
Fig. 9
Fig. 10
Fig. 11