Cooling Fan - Electrolux EOB 66713 User Information

Safety Thermostat
To prevent dangerous overheating (through
incorrect use of the appliance or defective
components), the oven is fitted with a safety
thermostat, which interrupts the power supply.
The oven switches back on again automatically,
when the temperature drops.
Should the safety thermostat trigger due to
incorrect use of the appliance, it is enough to
remedy the error after the oven has cooled
down; if on the other hand, the thermostat
triggers because of a defective component,
please contact Customer Service.

Cooling fan

The purpose of this is to cool the electrical
components, the control switches and the door
handle.
The fan is switched on and off automatically
when the selection dial is turned.
To prevent dangerous overheating the
cooling fan runs after the oven has been
switched off until the temperature has
reached normal values.
The oven has four shelf levels and is
delivered with one shelf.
The positioning of the shelf levels is
indicated on the oven door.
The shelf positions are counted from the
floor of the oven upwards, as shown in
the figure.
Telescopic pull-out rails
Important: Telescopic pull-out rails and
other accessories get very hot! Use oven
gloves or similar!
The oven has side rails with telescopic pull-
out rails on 3 levels (Fig. 18).
• To insert a grill shelf, baking tray or roasting
tray, first pull out the telescopic rails on one
level (Fig. 19).
22
• Lay the grill shelf, baking tray or roasting
tray onto the extended rails and push it
right back into the oven as far as it will go
(Fig. 19).
Do not close the oven door until the tele-
scopic rails are pushed all the way in.
4
3
2
1
Fig. 18
Fig. 19