Optional Serial Communications Board For N-Type Cpu Units With 30 Or 40 I/O Points; With 30 Or 40 I/O Points - Omron CP1E Series User Manual

3 Part Names and Functions
3-1-4 Optional Serial Communications Board for N-type CPU Units with
30 or 40 I/O Points
The Option Board can be mounted in the option slot of a CP1E N-type CPU Unit with 30 or 40 I/O
Points.
CP1W-CIF01
RS-232C Option
Board
Model numbers
CP1W-CIF01
CP1W-CIF11
CP1W-CIF12
How to mount an Option Board
When mounting an Option Board, first remove the slot cover.
Grasp both of the cover's up/down lock levers at the same time to unlock the cover, and then pull the
cover out.
Then to mount the Option Board, check the alignment and firmly press it in until it snaps into place.
Precautions for Correct Use Precautions for Correct Use
Always turn OFF the power supply to the PLC before mounting or removing an Option Board.
3-16
CP1E N-type CPU Unit

with 30 or 40 I/O Points

CP1W-CIF11/12
RS-422A/485 Option
Board
Port
One RS-232C port
One RS-422A/485 port (not isolated) 50m
RS-422A/485 port (isolated)
Maximum
transmission Connection method
distance
15m Connector (D-sub, 9 pin female)
Terminal block (using ferrules)
500m Terminal block (using ferrules)
CP1E CPU Unit Hardware User's Manual(W479)