Basic System Configuration Using An N-Type Cpu Unit - Omron CP1E Series User Manual

2-1-2

Basic System Configuration Using an N-type CPU Unit

The system configuration when using a CP1E N-type CPU Unit is shown below.
Battery
CP1W-BAT01
Support Software
Personal computer
CX-Programmer for CP1E
IBM PC/AT or equivalent
Programmable
Terminal (PT)
(NT Link)
General component Inverter
(No-protocol mode)
(Modbus-RTU)
CP-series PLC or
CJ1M PLC Host computer
(Host Link)
(Serial PLC Link)
CP1E CPU Unit Hardware User's Manual(W479)
2 Basic System Configuration and Devices
CP1E CPU Unit Expansion I/O Units
CPU Unit with 30 or 40 I/O Point CPU Unit with 20 or 40 I/O Points
CP1E-N30 -A
8 inputs
CP1E-N40 -A
8 outputs
16 outputs
32 outputs
CPU Unit with 20 I/O Points
RS-232C Option Board
CP1E-N20 -A
CP1W-CIF01
Expansion Units
Analog I/O
Analog inputs
Analog outputs
Temperature sensors
CompoBus/S I/O Link Unit
Up to 3 Units can be connected
*Neither the CP1W-DAM01 LCD Option Board nor the CP1W-CIF41
Ethernet Option Board can be used.
RS-422A/485 Option Board
Or CP1W-CIF11
CP1W-CIF12
COMM COMM
When a two level layout is created by expansion and distance is required
Expansion Units and
CP1E CPU Unit Expansion I/O Units
DIN Track
2
I/O Connecting Cable
CP1W-CN811
2-3