Installation Example
DIN Track Installation
Secure the DIN Track with screws in at least three places.
Surface Installation
A CP1E CPU Unit and CP-series Expansion I/O Units and Expansion Units can be mounted using
M4 screws. For restrictions on the number of Expansion I/O Units and Expansion Units that can be
connected,
DIN Track Installation
1
Use a screwdriver to pull down the DIN Track mounting pins from the back of the Units to
release them, and mount the Units to the DIN Track.
2
Fit the back of the Units onto the DIN Track by catching ( ) the top of the Units on the Track and
then pressing ( ) in at the bottom of the Units, as shown below.
CP1E CPU Unit Hardware User's Manual(W479)
refer to 2-3 Expansion I/O Unit or Expansion Unit.
Release
DIN Track
5 Installation and Wiring
DIN Track
DIN Track mounting pins
5
5-9