Step 1. Setup Login Password - Zoom Wireless-N User Manual

Note: Later, if you change the System Password, you will use the new password to log
in.
4
Click Wizard on the Toolbar to launch the Setup Wizard, which will guide you through
the configuration process.
5
The Setup Wizard page opens.
6
Each of the five Steps guides you in configuring a specific setting or group of settings.
When you click Next or Back, you move from one step to another. If there is a setting
that you don't want to change, simply click Next to go to the next setting.

Step 1. Setup Login Password

To view or change configuration settings, you must enter a password. Your Router's default
password admin was set by the factory and you used it to access the Configuration Manager
initially. To safeguard your configuration, particularly if you make changes, we recommend that
you change the login password. If you want to keep the default password, click Next and
continue reading at step 2 below. If you want a new password, continue with step 1 directly
below.
1
On the Setup Login Password page, type the old password (initially admin) in the Old Password
field.
2
Type the new password in the New Password field.
3
Type the new password in the Reconfirm field, and then click Next.
8 Wireless-N 4-port Router User Manual