Remote: IP
Define the remote IP address of packets.
Remote: Ports
Define the remote port of packets.
QoS Priority
Select a value from the dropdown menu to define the priority level for the local and
remote settings. Packets will be serviced based upon the priority level set. For critical
applications, select High or Normal. For non-critical applications, select Low.
Normal is the default value.
Enable
Click the Enable checkbox to apply the settings.
User Rule#
Select a rule from the dropdown menu to indicate when the policy applies. (0) always
is the default value.
The SNMP Page
You can use the Simple Network Management Protocol (SNMP) page to set up the capability
to remotely manage a computer network by polling and setting terminal values and monitoring
network events. Most users do not need to set up SNMP.