Step 1. Setup Login Password; Step 2. Wan Type Setup - Zoom Wireless-N User Manual

Step 1. Setup Login Password

To view or change configuration settings, you must enter a password. Your Router's default
password admin was set by the factory and you used it to access the Configuration Manager
initially. To safeguard your configuration, particularly if you make changes, we recommend that
you change the login password. If you want to keep the default password, click Next and
continue reading at step 2 below. If you want a new password, continue at step 1 directly below.
1
On the Setup Login Password page, type the old password (initially admin) in the Old Password
field.
2
Type the new password in the New Password field.
3
Type the new password in the Reconfirm field, then click Next.
Note: If you forget the new password, you won't have access to the Configuration Manager and
will need to restore the device to its factory settings (see
Configuration), thus losing any changes you made to your Router's configuration. To avoid this
problem, we recommend that you write the new password here and on the bottom of your
Wireless-N 4-port Router, and that you also save it elsewhere such as a settings document.
PASSWORD:______________________________________

Step 2. WAN Type Setup

On the WAN Type Setup page, select Setup Ethernet Client Mode. Then click Next.
Chapter 3: Connecting an Ethernet Client
Resetting the Router to the Factory
25