The Schedule Rule Page - Zoom Wireless-N User Manual

Dynamic Routing
The Routing Information Protocol (RIP) will exchange information about
destinations for computing routes throughout the network. Please select RIPv2 only
if you have different subnet in your network. Otherwise, please select RIPv1 if you
need this protocol.
Static Routing
For static routing, you can specify up to eight routing rules. You can enter the
Destination IP address, Subnet Mask, Gateway, Hop for each routing rule. Click
the Enable checkbox to activate the routing table entry.

The Schedule Rule Page

You can use the Schedule Rule and Schedule Rule Setting pages to define when services will
be turned on and off based on rules that you define.
1
On the Schedule Rule page, click the Enable checkbox to enable the scheduling rules, which are
defined on the Schedule Rule Setting page.
a Click Add New Rule to open the Schedule Rule Setting page.