Step 5. Finish - Zoom Wireless-N User Manual

Step 5. Finish

The Finish page displays the saved configuration settings for your Router.
Click Finish to exit the Setup Wizard and return to the Main Menu.
Important! If you see the message "Connection to Internet Failed!" try the following:
•
Check that the Ethernet cables are all securely connected.
•
Check that you have installed an Ethernet cable from the Router's WAN port to the
Ethernet port of your Cable or ADSL modem.
•
Power off your computer, the Router and your modem, and then turn on modem and
allow it to connect. Next turn on the Router, wait until the Router is completely powered
up and the WLAN light is blinking, then turn on your computer. Try running the setup
wizard again.
•
Click the Reconfigure button and go through the configuration again. This time uncheck
the Do you want to proceed with the Network Testing? button. After you Apply the
settings, try opening your browser and going to your favorite web page. If this doesn't work
contact Zoom Technical Support. See
Help.
Congratulations! Your Wireless-N 4-port Router is now setup. If you need help connecting
additional computers or devices to your Wireless-N 4-port Router please refer to:
Chapter 5, Setting up a Network
devices through the Wireless-N 4-port Router's Ethernet ports.
Chapter 6, Connecting Wireless Devices to the Wireless-N 4-port Router
connecting wireless computers, phones, tablets and game stations.
In the unlikely event you need to make changes to the Wireless-N 4-port Router's advanced
settings please see Chapter 7, Using the Configuration Manager's Advanced
20
Appendix D, Registering your Product and Getting
for help on adding other computers or network
Wireless-N 4-port Router User Manual
for help on
Program.