Method Three
Use this method if your client device requests the Router's PIN number. The client is the
Registrar. Use this method if the client(s) are to connect to multiple access points so that a
client will control the configuration instead of the Router.
1
If you haven't already done so, open a Web browser and type http://192.168.2.1 in the address bar.
a
When the Configuration Manager launches, log in as admin, then select Advanced > Basic
Settings > Wireless to open the Wireless Setup page.
b
Click the WPS Setup button.
c
Select Enrollee from the Setup option.
d
Click Generate New PIN to generate a new PIN number.
e
Enter the Router's PIN Number into your client device. Refer to your client's
documentation for further details.
Important! You must do this within two minutes after starting the Router.
Click Save to save the configuration.