The Wireless Settings Page - Zoom Wireless-N User Manual

Fixed Mapping
Clicking on the Fixed Mapping button brings you to the Fixed Mapping page. On this page you
can set your DHCP server to always assign the same IP address to a computer connected to the
Router. Otherwise the IP address assigned by the DHCP server could change over time. Fixed
Mapping allows you to assign the same IP address to your computer every time. This is important
if you are setting up a DMZ, Virtual Server, or Port Forwarding rule to be used with online
gaming.
To setup Fixed Mapping select the computer you wish to use the same IP address from the
DHCP Clients drop down list. Select 1 from the ID drop down list and click the Copy to button to
copy the MAC address into the table. Now enter the IP address that you want the computer to
always be assigned and check the Enable box. This assigned "fixed" address should be outside of
the current DHCP pool. The default pool is 100-200. So any fixed IP outside of this range should
work fine and avoid any possibility of the router assigning a specified "fixed" address to another
LAN host.
Click Save and now the computer you selected will always be assigned the same IP address.

The Wireless Settings Page

You can use the Wireless Settings page to configure your wireless LAN setup. If you want to
change the default values, refer to the descriptions below for each item.
48 Wireless-N 4-port Router User Manual