Topcom BUTLER 5750 User Manual page 32

Answering machine
The recording cannot exceed 2 minutes. If no outgoing message is recorded, the
prerecorded outgoing message is used.
Playback the Outgoing Message
To check the outgoing message:
Select outgoing message (Answering mode)
Erasing the Outgoing Message
If you erase the outgoing message, the default message will be played.
During playback of the outgoing message (see above) you can delete the message by pressing
'Delete'.
19
2 Select "Ans Machine" and confirm.
3 Select "Outgoing Msg" and confirm.
4 Select "Record Message" and confirm.
5 Select 'Answer & Record' for OGM1 or 'Answer Only' for OGM2.
6 Start speaking after the beep and press 'Save' to confirm.
The recorded message will be played back.
7 During playback press 'Delete' to erase or press 'Stop' to interupt the
playback.
1 Enter the menu.
2 Select "Ans Machine" and confirm.
3 Select "Outgoing Msg" and confirm.
4 Select "Play Message" and confirm.
5 Select 'Answer & Record' for OGM1 or 'Answer Only' for OGM2 and
confirm.
6 The message will be played back. Press 'Delete' to erase or press 'Stop' to
interupt the playback.
1 Enter the menu.
2 Select "Ans Machine" and confirm.
3 Select "Ans Settings" and confirm.
4 Select "Answer Mode" and confirm.
5 Select 'Answer & Record' for OGM1 or 'Answer Only' for OGM2 and
confirm.