Yaesu FT-8800R Operating Manual page 8

(3) Left and Right
The (Squelch) control is used to silence background noise on the adjoining receiver.
SQL
• Clockwise rotation decreases the squelch level.
• It should be advanced clockwise just to the point where the noise is silenced (and the
indicator on the display turns off), so as to provide the best sensitivity to weak
signals.
(4) Hyper Memory Buttons
• Press and hold in one of these buttons for 2 seconds to store the current total
configuration of the radio into a special Hyper memory bank.
• Press the appropriate button momentarily to recall the desired Hyper memory.
(5) Left and Right Side Key
Left Side Keys
The left side keys function
as LOW, V/M, HM, and
SCN.
Left Side Keys (always) and Right Side Keys when in Key Mode 1
Key: (Default)
Press this key repeatedly to toggle the transmitter power output level of the adjoining
•
band:
LOW MID2
• When the adjoining band is set to the
hold in this key for ½ second to switch the memory channel display between the
Frequency format and the Alpha-numeric Tag format.
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
Knobs
SQL
MID1 HIGH
...
TONE, and SUB (
mode or
Memory Home Channel
INTRODUCTION
Right Side Keys
The right side keys may
be set to function as
LOW, V/M, HM, and SCN
(default) or as MHz, REV,
).
, press and
Page 8 of 83