Activate Memory Only Mode - Yaesu FT-8800R Operating Manual

Activate Memory Only Mode

Once channel programming has been completed, you may place the radio in a
Memory
mode, whereby
Memory Only
during public-service events where a number of operators may be using the radio for first
time, and ultimate simplicity of channel selection is desired.
To place the radio into the
1. Turn the radio off.
2. Press and hold in the Left
3. Rotate the Right
key momentarily.
To return to normal operation, repeat the above steps.
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
operation is impossible. This may be particularly useful
VFO
mode:
Memory Only
key while turning the radio on.
knob to select the (
DIAL
0.
), then press the
F-6 M-ONLY MODE
REGULAR MEMORY
SET
Page 42 of 83