Tune From A Stored Memory; Delete A Memory - Yaesu FT-8800R Operating Manual

Tune from a Stored Memory

Once you have recalled a particular memory channel, you may easily tune off that channel, as though
O
you were in the VF
1. With the
FT−8800R
channel.
2. Now press and hold in the
will appear on the display.
3. Rotate the
operation on the current band will be the steps used during Memory Tuning.
VFO
4. Press and hold in the
copied to
VFO
previously-stored channel.
5. If you wish to return to the original memory frequency, press the
momentarily. The

Delete a Memory

With 1052 memories available (except memory channel #1), there are frequently situations
where you may desire to delete certain memorized frequencies. The procedure for deleting a
channel is quite simple:
1. If operating in the
mode.
2. Press and hold in the
select the memory channel to be deleted. (Note that memory channel #1 may not be
deleted.)
3. Press the
Main
channel #1. If you rotate the
will observe that it is now invisible.
WARNING: Once deleted, the channel data cannot be recovered.
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
mode.
in the (
MR Memory Recall
knob to tune to a new frequency. The synthesizer steps selected for
DIAL
key for ½ second during
, although the original memory contents will remain intact on the
icon will disappear.
mode, press the
VFO
key for ½ second, then rotate the
SET
band key momentarily. The display will revert to memory
) mode, select the desired memory
key for ½ second. The
Memory Tuning
0.
key momentarily to enter the
knob to the location you just
DIAL
0.
REGULAR MEMORY
( mode) icon
Memory Tune
, the data will be
key
Memory
knob to
DIAL
, you
Masked
Page 39 of 83