How To Skip A Channel During Memory Scan - Yaesu FT-8800R Operating Manual

To initiate
Standard
1. Configure the
2. Press the
3. To cancel the

How to Skip a Channel During Memory Scan

Some continuous-carrier stations like a
scanning operation especially if
pause long enough for the
To skip a channel during scanning:
1. Set the radio to the
2. Rotate the
3. Set the band for selected
the knob.
DIAL
4. Press the
5. Rotate the
6. Press the
7. Press and hold in the
normal operation.
This
Memory Channel
when you manually recall this skipped memory channel.
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
Memory Scan:
for
FT−8800R Standard Memory Scan
key momentarily to initiate
Standard Memory Scan
Weather Broadcast
Menu #34 SCAN
to resume scanning.
FT−8800R
mode by pressing the
Memory
knob to select the
DIAL
Memory Channel
momentarily to enter the
SET key
knob to select
DIAL
knob momentarily, then rotate the
DIAL
DIAL
0.
will now be ignored during scanning. The
, if necessary.
Standard Memory Scanning
, press the
station will seriously impede
is set to , as the incoming signal will not
BUSY
to be skipped during scanning.
Memory Channel
to be skipped to the
mode.
Set
Menu #37 SKP.MSM
knob for ½ second to save the new setting and exit to
.
key momentarily. 0.
key, if necessary.
band by pressing
Main
.
knob to
DIAL
SKIP
indicator will appear
Page 52 of 83
SCANNING
.