Ip Dhcp Snooping Trust; Show Ip Dhcp Snooping - Asus GIGAX 2024M Cli Manual

GigaX2024B/M L2 Managed Switch CLI Manual
Description
Examples

17.3 ip dhcp snooping trust

Syntax
Parameters
Command Mode Interface Mode
No/clear
show
Default
Description
Examples

17.4 show ip dhcp snooping

Syntax
Parameters
Command Mode Enable Mode
No/clear
show
Default
Description
Examples
204
Enable DHCP snooping on a VLAN or range of VLANs. The
range is 1 to 3000. You can enter a single VLAN ID identified by
VLAN ID number, a series of VLAN IDs separated by commas,
a range of VLAN IDs separated by hyphens, or a range of VLAN
IDs separated by entering the starting and ending VLAN IDs
separated by a space.
ASUS(config)# ip dhcp snooping vlan 1-100
ip dhcp snooping trust
no ip dhcp snooping trust
show ip dhcp snooping
(Optional) Configure the interface as trusted or untrusted. You
can use the no keyword to configure an interface to receive
messages from an untrusted client. The default is untrusted.
ASUS(config-if)# ip dhcp snooping trust
show ip dhcp snooping
DHCP snooping configuration is displayed
ASUS#show ip dhcp snooping