Lacp System-Priority <1-65535; Show Lacp [Groupid] - Asus GIGAX 2024M Cli Manual

GigaX2024B/M L2 Managed Switch CLI Manual
No/clear
Show
Default
Description
Example
2.3 lacp system-priority <1-65535>
Syntax
Parameters
Command Mode Configure terminal mode
No/clear
Show
Default
Description
Example
2.4

show lacp [GROUPID]

GX2024B GROUPID range is 1-6
Syntax
Parameters
Command Mode Privileged EXEC mode
Default
Description
Example
6
lacp aggregation-link group delete IFNAME
show aggregation-link group [GROUPID]
No default lacp aggregation-link trunk group enable
This command sets the Link Aggregation Control Protocol (LACP)
operation add/set or disable for the trunk group ports on the
switch stack or on a standalone switch.
ASUS(config)# lacp aggregation-link group delete fa1/0/1
lacp system-priority <1-65535>
system-priority
<1-65535>
no lacp system-priority
show lacp system-priority / show running-config
The default is 32768.
This command sets the system priority for the Link Aggregation
Control Protocol (LACP) on the switch stack or on a standalone
switch.
ASUS(config)# lacp system-priority 2000
show lacp [GROUPID]
[GROUPID] valid group-id range is 1 to 32
None or depends on ODM customer
Use the show lacp user EXEC command to display Link
Aggregation Control Protocol (LACP) channel-group information.
ASUS#show lacp 1
Priority of the system
Valid values are from 1 to 65535