Dot1X Timeout (Reauth-Period| Quiet-Period|Tx-Period| Supp-Timeout| Server-Timeout) Timevalue - Asus GIGAX 2024M Cli Manual

GigaX2024B/M L2 Managed Switch CLI Manual
Show
Default
Description
Example
6.9 dot1x timeout (reauth-period| quiet-period|tx-
period| supp-timeout| server-timeout) TIMEVALUE
Syntax
Parameters
Command Mode Interface mode
No/clear
Show
Default
20
show dot1x / show running-config
The default is global disable
Use the dot1x system-auth-control global configuration command
on the switch stack or on a standalone switch to globally enable
802.1X. Use the no form of this command to return to the default
setting.
ASUS(config)# dot1x system-auth-control
dot1x timeout (reauth-period| quiet-period|tx-period| supp-
timeout|server-timeout) TIMEVALUE
reauth-period ->
reauthentication attempts
quiet-period ->
in the quiet state following a failed authentication exchange with
the client
tx-period ->
for a response to an EAP-request/identity frame from the
client before retransmitting the request
supp-timeout ->
for a response from Authenticator to Supplicant
server-timeout ->
for a response from Authenticator to Authentication Server
TIMEVALUE:
no dot1x timeout (quiet-period| reauth-period| server-timeout|
supp-timeout| tx-period)
show dot1x all / show dot1x interface IFNAME
reauth-period: 3600 seconds
quiet-period: 60 seconds
tx-period: 30 seconds
supp-timeout: 30 seconds
number of seconds between
number of seconds that the system remains
number of seconds that the system waits
number of seconds that the system waits
number of seconds that the system waits
1~65535 seconds