Ip Commands; Dot1X Commands - Asus GigaX1116i+ User Manual

[Mirror Source]
Set or show the source port mirror mode.
[<portlist>]: Source port list (default: All ports).
[enable|disable]: Enable/disable mirroring of frames received on port (default:
Show mirror mode).
CLI command : Mirror Source [<portlist>] [enable|disable]

5.2.11 IP Commands

[IP Configuration]
Show IP configured IP address, mask, gateway, VLAN ID and mode.
CLI command : IP Configuration
[IP Setup]
Setup or show IP configuration.
[<ipaddress>]: IP address. (default: Show IP configuration)
[<ipmask>]: IP subnet mask (default: Subnet mask for address class).
[<ipgateway>]: Default IP gateway, (default: 0.0.0.0).
[<vid>]: VLAN ID, 1-4095 (default: 1).
CLI command : IP Setup [<ipaddress> [<ipmask> [<ipgateway>]]] [<vid>]
[IP Mode]
Activate or deactivate the IP configuration.
[enable|disable]: Enable/disable IP (default: Show IP mode).
CLI command : IP Mode [enable|disable]
[Arp]: Show ARP table in the switch.
CLI command : arp

5.2.12 Dot1x Commands

[Dot1x Configuration]
Show current 802.1X configuration.
CLI command : Dot1x Configuration
GigaX Series L2 Smart Plus Switch User Manual
49