Asus GIGAX 2024M Cli Manual page 208

GigaX2024B/M L2 Managed Switch CLI Manual
Command Mode Configure terminal mode
No/clear
Show
Default
Description
Examples
13.122
(deny|permit) icmp any host IPADDR <0-255>
[IFNAME]
Syntax
Parameters
Command Mode Configure terminal mode
No/clear
188
[IFNAME]
no access-list (<100-199>|<2000-2699>) (deny|permit) icmp
host IPADDR host IPADDR <0-255> [IFNAME]
Show acces-lists [number|name]
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
ASUS(config)#access-list 100 permit icmp host 10.0.0.1host
10.0.0.4 1
access-list (<100-199>|<2000-2699>)
access-list (<100-199>|<2000-2699>) (deny|permit) icmp any
host IPADDR <0-255> [IFNAME]
Access-list
<100-199>
<2000-2699>
range)
permit->
deny->
Icmp->
Any
.host
IPADDR
<0-255>
[IFNAME]
no access-list (<100-199>|<2000-2699>) (deny|permit) icmp any
host IPADDR <0-255> [IFNAME]
Egress interface name
Add an access list entry
Extended IP access-list number
Extended IP access-list number (expanded
Specify packets to forward
Specify packets to reject.
Internet Control Message Protocol
Any Source host
A single destination host
Destination address
ICMP message type
Egress interface name