GigaX2024B/M L2 Managed Switch CLI Manual
Show
Default
Description
Examples
13.31 (permit|deny) (ip|tcp|udp|icmp) any host
IPADDR [IFNAME]
Syntax
Parameters
Command Mode IP extended access-list mode
No/clear
Show
Default
Description
Examples
110
code <1-255> [IFNAME]
Show acces-lists [number|name]
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
ASUS(config-ext-acl)# permit icmp 10.0.0.1 0.0.0.0 host 10.0.0.2
1 code 1 [fa1/0/2]
(permit|deny) (ip|tcp|udp|icmp) any host A.B.C.D [IFNAME]
permit->
deny->
Ip ->
Tcp->
Udp->
Icmp->
any
host
IPADDR
[IFNAME]
no (permit|deny) (ip|tcp|udp|icmp) any host IPADDR [IFNAME]
Show acces-lists [number|name]
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
ASUS(config-ext-acl)#permit tcp any host 10.0.0.1 [fa1/0/2]
Specify packets to forward
Specify packets to reject.
Any Internet Protocol
Transmission Control Protocol
User Datagram Protocol
Internet Control Message Protocol
any source address
A single destination host
Destination address
Egress interface name